blog.shiraj.com
VPN Does Not Connect When Using Virgin Media SuperHub « Memorise
http://blog.shiraj.com/2015/04/vpn-does-not-connect-when-using-virgin-media-superhub
VPN Does Not Connect When Using Virgin Media SuperHub. April 14, 2015. When setting up a VPN, you can run into problems with VPN pass through. If you are using a Virgin Media SuperHub you have the added challenge that is by default, your speedy SuperHub will block outgoing VPN traffic meaning that with all the correct details it just doesn’t work. To fix this, just follow the below steps:. Browse to your SuperHub’s IP Address (e.g. 192.168.0.1 or external IP) and log in. Try to connect your VPN again.
blog.shiraj.com
LYNC « Memorise
http://blog.shiraj.com/category/microsoft/lync
Archive for the ‘LYNC’ Category. Lync Server Access Edge service fails to start with: service-specific error code -2146762487. March 5, 2015. Problem Lync Server 2013 Role: Lync Edge Base Operating System: Windows Server 2012 You attempt to start your Lync Server 2013’s Edge server’s Lync Server Access Edge service but notice that the service fails with the following message: Windows could not start the Lync Server Access Edge on Local Computer. For more information, review the […]. En Route Main Site.
blog.shiraj.com
Password Recovery Procedure for the Cisco 881 Series Routers « Memorise
http://blog.shiraj.com/2014/11/password-recovery-procedure-for-the-cisco-881-series-routers
Password Recovery Procedure for the Cisco 881 Series Routers. November 28, 2014. Follow these steps in order to recover your password:. Attach a terminal or PC with terminal emulation to the console port of the router. Use these terminal settings:. Refer to these documents for information on how to cable and connect a terminal to the console port or the AUX port:. Cabling Guide for Console and AUX Ports. Connecting a Terminal to the Console Port on Catalyst Switches. If the break sequence does not work, ...
blog.shiraj.com
How to make a bootable OS X 10.10 Yosemite install drive « Memorise
http://blog.shiraj.com/2015/01/how-to-make-a-bootable-os-x-10-10-yosemite-install-drive
How to make a bootable OS X 10.10 Yosemite install drive. January 9, 2015. Connect to your Mac a properly formatted 8GB (or larger) drive, and rename the drive. Select the text of this Terminal command and copy it:. Sudo /Applications/Install OS X Yosemite.app/Contents/Resources/createinstallmedia - volume /Volumes/Untitled - applicationpath /Applications/Install OS X Yosemite.app - nointeraction. Launch Terminal (in /Applications/Utilities). Paste the copied command into Terminal and press Return. Which...
blog.shiraj.com
06 « May « 2015 « Memorise
http://blog.shiraj.com/2015/05/06
Archive for May 6th, 2015. Shrew Soft Mac OSX vpn client. May 6, 2015. Shrew Soft have a Mac OSX port of the VPN client based on the head ( 2.2.x ) sources. It seems that it requires more testing, but it appears to be more or less stable. There are two requirements / dependency before running the native install package (.dmg file) 1) Install the LGPL Qt Framework […]. Share your thoughts on this. En Route Main Site. AppleTV enable USB storage. AppleTV AppleTV Firmware Download Locations.
blog.shiraj.com
Re-create outlook profile « Memorise
http://blog.shiraj.com/2015/05/re-create-outlook-profile
May 11, 2015. Sometime in terminal server you don’t have mail applet in control panel. You can create profile using method below. C: Program Files (x86) Microsoft Office Office14 outlook.exe /profile nameofprofile. To Reset Outlook 2010 to First Run Settings. 1 Use the command line switch /profile xxx. 2 Outlook will report that there is no such profile and prompt for another. 3 Click “New” and name a new profile. Go ahead and enter your new mail account settings under the newly created profile.
blog.shiraj.com
How to Configure NAT on Cisco router « Memorise
http://blog.shiraj.com/2014/11/1118
How to Configure NAT on Cisco router. November 20, 2014. This brief tutorial will show you how to configure NAT overload or how to enable Internet access to multiple PCs of your LAN using only one public IP address. This type of NAT can easily be used at home when you have a Cisco 800 series xDSL router. The first step is to define the addresses that will need to be NAT’d. This is done using a standard access-list:. Your lan address range. Example: access-list 1 permit 192.168.1.0. You must be logged in.
blog.shiraj.com
Initiate Shadow Of Remote Connection From Server 2012 R2 Command Line « Memorise
http://blog.shiraj.com/2014/11/initiate-shadow-of-remote-connection-from-server-2012-r2-command-line
Initiate Shadow Of Remote Connection From Server 2012 R2 Command Line. November 14, 2014. Terminal Services had the ability to shadow a user’s session; however, this was removed in Windows Server 2012. Now Windows Server 2012 R2 brings this capability back. It can be initiated using Server Manager as shown below, but many people also want to initiate from the command line. SESSIONNAME USERNAME ID STATE TYPE DEVICE. Rdp-tcp#37 bruce 2 Active. Rdp-tcp#38 administrator 3 Active. Leave a Reply Cancel reply.
blog.shiraj.com
Juniper « Memorise
http://blog.shiraj.com/category/juniper
Archive for the ‘Juniper’ Category. VPN Does Not Connect When Using Virgin Media SuperHub. April 14, 2015. When setting up a VPN, you can run into problems with VPN pass through. If you are using a Virgin Media SuperHub you have the added challenge that is by default, your speedy SuperHub will block outgoing VPN traffic meaning that with all the correct details it just doesn’t work. To fix this, just follow […]. Share your thoughts on this. January 13, 2015. Share your thoughts on this. March 26, 2013.
