aac-bricks.in

fly-ash-bricks.in

Advantages of FAB - Fly Ash Bricks | Fly Ash Bricks

http://fly-ash-bricks.in/advantages-of-fab/75

Due to high strength, practically no breakage during transport and use. Due to uniform size of bricks mortar required for joints and plaster reduces almost by 50%. Due to lower water penetration seepage of water through bricks is considerably reduced. Gypsum plaster (plaster of Paris) can be directly applied on these bricks without a backing coat of lime plaster. These bricks do not require soaking in water for 24 hours. Sprinkling of water before use is enough. Also visit: AAC Bricks.

clc-bricks.in

CLC Flooring / Roofing - Cellular Lightweight Bricks | Cellular Lightweight Bricks

http://www.clc-bricks.in/clc-flooring-roofing

CLC Flooring / Roofing. CLC Flooring / Roofing. CLC Roofs and Floors reduce dead-weight, improve weather-proofing and minimize air-conditioning requirements. CLC is used for roofing and flooring applications extensively. A low density mix is chosen and the resulting air content gives the material excellent thermal insulation properties. The low density also has the advantage that it does not significantly add to the overall weight of the roof. CLC structures require minimal plastering and water-proofing.

clc-bricks.in

CLC structures require minimal plastering and water-proofing - Cellular Lightweight Bricks | Cellular Lightweight Bricks

http://www.clc-bricks.in/clc-structures-require-minimal-plastering-and-water-proofing/175

CLC Flooring / Roofing. CLC structures require minimal plastering and water-proofing. CLC structures require minimal plastering and water-proofing. Posted by Brickwell Cellular Lightweight Concrete. On Dec 6, 2013 in Updates. CLC structures require minimal plastering and water-proofing. CLC can be produced as massive block and cut to specification. CLC Flooring & Roofing reduces sound insulation and air-conditional requirements. CLC Blocks are easily worked with power-tools on-site. Also visit: AAC Bricks.

fly-ash-bricks.in

What is FAB - Fly Ash Bricks | Fly Ash Bricks

http://fly-ash-bricks.in/what-is-fab

Fly ash brick (FAB) is a building material, specifically masonry units, containing class C fly ash and water. Owing to the high concentration of calcium oxide in class C fly ash, the brick is described as “self-cementing”. The manufacturing method saves energy, reduces mercury pollution, and costs 20% less than traditional clay brick manufacturing. Also visit: AAC Bricks. Designed and Maintained by UV Communications.

clc-bricks.in

What is CLC - Cellular Lightweight Bricks | Cellular Lightweight Bricks

http://www.clc-bricks.in/what-is-clc

CLC Flooring / Roofing. House made of Lightweight Concrete Blocks. Since the early twentieth century, two ideas were developed to produce lightweight concrete Aerated Autoclave Concrete (AAC) and Cellular Lightweight Concrete (CLC). Each is based on the idea that adding air bubbles to mortar would lower its weight while at the same time improving the product. The difference between AAC and CLC lies in how the air bubbles are generated. As compared to AAC lightweight products, CLC air bubbles are signific...

fly-ash-bricks.in

FAB Manufacturing - Fly Ash Bricks | Fly Ash Bricks

http://fly-ash-bricks.in/fab-manufacturing

Fly ash, lime sand and gypsum are manually fed into a pan mixer where water is added in the required proportion for intimate mixing. The proportion of the raw material is generally in the ratio 60-80% of fly ash 10-20% lime, 10% Gypsum and 10% sand, depending upon the quality of raw materials. Also visit: AAC Bricks. Designed and Maintained by UV Communications.

fly-ash-bricks.in

Advantages of FAB - Fly Ash Bricks | Fly Ash Bricks

http://fly-ash-bricks.in/advantages-of-fab

Due to high strength, practically no breakage during transport and use. Due to uniform size of bricks mortar required for joints and plaster reduces almost by 50%. Due to lower water penetration seepage of water through bricks is considerably reduced. Gypsum plaster (plaster of Paris) can be directly applied on these bricks without a backing coat of lime plaster. These bricks do not require soaking in water for 24 hours. Sprinkling of water before use is enough. Also visit: AAC Bricks.

fly-ash-bricks.in

Applications of FAB - Fly Ash Bricks | Fly Ash Bricks

http://fly-ash-bricks.in/applications-of-fab

The blocks being available in several load bearing grades are suitable for use:. Load bearing external walls, in low and medium size structures. Non-load bearing internal walls in low and medium size structures. Non-load bearing internal or external walls in high-rise buildings. Sizes available :230 x 110 x 70 mm. Raw Material Used : fly ash, sand, grit, cement. Uses : constructions of walls. Colors and packaging available : light grey, minimum 1 load truck can be delivered. Also visit: AAC Bricks.